Surface Design: Laser Cut Sample



Comments

Post a Comment

Popular posts from this blog

Mass Producible Object Results

Image
I ended up making four versions of the tie. The first two prototypes were the ties on the left in each image while the ties on the right are the revised versions. For the plain tie, the biggest change ended up being the way I cut the wood. I wanted it to look more intentional when the grain changed directions, which was my issue with the first version. I also increased spacing between each slot, as suggested by Bryan. With the engraved set, I ended up using watercolor paint to give it a sort of wash. This helped cover up some staining caused by the laser cuter. The second version I used a mask over the whole thing, but that ended up having a lot harder of a time engraving it. The wood was cleaner (although I will admit the bookstore provided me with the wrong type of wood, so it ended up way lighter than intended, even with a watercolor wash). I tried it on and the length of it fits really well with the length of my torso. The weight of the tie didn't pull off the glued clasp eithe...
Read more

Project 2 - Mass Producible Object Proposal

Image
For project two, I want to expand on my current project, but I think that I should finish it up closer to the end of term.  I dramatically redesigned the edges to contain straight edges so that they are easily stackable and portable, like an Ikea shelf would be. In terms of naming it as a product, I would advertise it along the lines of "geometric dragon bookshelf" because I want to keep the name relatively literal. I ended up making a lot of progress on redesigning the bookshelf to be cut exclusively on the CNC machine. I was pretty torn over designing the curved shelves, so I approached it with the intent of using only straight boards with diagonal cuts. Until then, I'd like to work on a project that is relatively small scale but will still take up the rest of my semester.  When considering mass-production, the first thoughts that come to mind is something that can appeal to an audience. So for this project, instead of making an object designed for myself, I want to cre...
Read more

Interactive LED Circuit

Image
(Video link also here  https://vimeo.com/790609322  ) void setup() { Serial.begin(9600); pinMode(5, OUTPUT); pinMode(6, OUTPUT); pinMode(9, OUTPUT); pinMode(10, OUTPUT); pinMode(11, OUTPUT); //pushbutton pinMode(12,INPUT); digitalWrite(12,HIGH); } void loop() { //is button pressed? if(digitalRead(12)==0){ //red light with green turn signal digitalWrite(11,HIGH); digitalWrite(5,HIGH); digitalWrite(10,LOW); digitalWrite(9,LOW); digitalWrite(6,LOW); delay(2000); //red light with yellow turn signal digitalWrite(5,LOW); digitalWrite(11,HIGH); digitalWrite(6,HIGH); delay(1000); //just red digitalWrite(11,HIGH); digitalWrite(6,LOW); delay(1000); //green light digitalWrite(11,LOW); digitalWrite(6,LOW); digitalWrite(9,HIGH); delay(2000); //yellow light digitalWrite(9,LOW); digitalWrite(10,HIGH); delay(1000); } //if button isn't pressed, potentiometer controls which light is on else{ if(analogRead(A0) 200&&analogRead(A0) 400&&analogRead(A0) 600&&analogRead(A...
Read more